3.2 Size and Acoustic Performance Requirements

The length of the NAT Vent Attenuator is a function of the required acoustic performance and the free area requirements for ventilation. If a large free area is needed, the depth of the cross talk attenuator will need to be increased. This increase in depth is required to balance against the increase in sound transmission as a result of a larger face area.

The free area of the NAT Vent Attenuator is typically between 20% and 50%. The calculated pressure drop through this product is minimal due the low air speed experienced with natural ventilation. 20% free area attenuators are used in cases where there is a limited depth for the attenuator. The drawback of this configuration is that a large face area is required to maintain the same free area specified by the M&E engineer. In this instance, the cross talk attenuator typically runs the width of the classroom, office or medical room.

The acoustic performance of the NAT Vent Attenuator is rated between 34 dB Dne,w and 39 dB Dne,w. Through research, it is seen that cross talk attenuators with an acoustic resistance of 34 dB Dne,w provide an equal performance to that of a solid partition containing an acoustically rated door (30 dB Rw). BB93 requires 39 dB Dne,w across a vent within a corridor wall, due to this limitation of the door this is seen as an over specification.